Ramsey Electronics AR2 Bedienungsanleitung

AR2 • 1 UP24B CONTROL COMMANDS AND DRIVER/SOFTWARE INSTALLATION Ramsey Electronics Model No. UP24B • Software and driver installation explained c

AR2 • 10 5. On the “Locate Driver Files” screen make sure only the “Specify a loca-tion” option is checked. 6. Click “Next” to cont

AR2 • 11 8. Click on “UP24 Install”. 9. Click “Open” 10. Select “UP24Drivers” from the list. 11. Click on “Open

AR2 • 12 12. Click on “Open” 13. Click on “OK”. 12.13.

AR2 • 13 15. 14. 14. Click on “Next” 15. Click on “Finish”. Some versions of Windows may have you go through the

AR2 • 14 CONNECTING TO WINDOWS HYPERTERMINAL 1. Install the Drivers for UP24B. (See UP24B Driver Installation.) 2. Select Programs/Accessories/Co

AR2 • 15 4. Set the port settings as follows: Bits Per Second Same As UP24B Data Bits 8 Parity None Stop Bits 1 Flow Control Non

AR2 • 16 Get Commands Command details G EL Get elevation Explanation: Gets the current elevation in the current units with offset added. Example: G E

AR2 • 17 Explanation: Gets the offset that is added to the elevation readings in the cur-rent units. Example: G OE<CR> sent 230.0ft<CR>&

AR2 • 18 ,6507558,6507558,6507558,6507557,6507557,6507557,6507557,6507557,6507557,6507557,6507558,6507560,6507567,6507570,6507570,6507577,6507577,650

AR2 • 19 G SR Get Sample Rate and Index Explanation: Outputs the current sample rate string and the index number. Example: G SR<CR> sent 0,1/

AR2 • 2 PARTIAL LIST OF AVAILABLE KITS: RAMSEY TRANSMITTER KITS • FM10C, FM25B, FM30, FM Stereo Transmitters • FM100B, FM35 Professional FM

AR2 • 20 Byte # 0 1 2 3 4 5 6 7 … 127 Hex Val FF 80 80 80 48 48 48 3F … FF 0 1 0 0 0 0 0 0 0 … 1 1 1 0 0 0 1 1 1 0 … 1 2 1 0 0 1 0 0 0 1 …

AR2 • 21 Set Commands S PU # Set pressure units index Explanation: Allows you to change the units. Use the table below for a list of units available

AR2 • 22 S RE Set reset elevation statistics Explanation: Allows resetting of all elevation statistics to zero. Example: S RE<CR> sent OK<

AR2 • 23 INSTALLING THE RAMSEY UP24 SOFTWARE 1. Right click the Windows Start menu select “Explore”. If you are already there from the EXTRACTING

AR2 • 24 5. Select “OK” on the prjUP24Normal Setup screen. 6. We suggest using the default directory for installing this prod

AR2 • 25 8. The setup of this section is now complete. Click on OK to exit. This pro-gram can now be found in programs/Ramsey/prjUP24N

AR2 • 26 4. 6. 7. 8. 9. 3. If the computer is not set up to communicate with the UP24B the “Configure” screen will appear. 4. The

AR2 • 27 Notes: ___________________________________________________________________________________________________________________________________

AR2 • 28 Notes: ____________________________________________________________________________________________________________________________________

AR2 • 29 Notes: ___________________________________________________________________________________________________________________________________

AR2 • 3 UP24B CONTROL COMMANDS AND DRIVER/SOFTWARE INSTALLATION Ramsey Publication No. UP24BS Manual Price Only $5.00

AR2 • 30 Notes: ____________________________________________________________________________________________________________________________________

AR2 • 31 THE RAMSEY KIT WARRANTY 1. GENERAL: Notice that this is not a "fine print" warranty. We want you to understand your rights and

AR2 • 32 RAMSEY ELECTRONICS, LLC 590 Fishers Station Drive Victor, New York 14564 Phone (585) 924-4560 Fax (585) 924-4555 www.ramseykits.com

AR2 • 4 INTRODUCTION This addition to your UP24B manual will help you install the drivers and software to connect the UP24B to your computer. This

AR2 • 5 DOWNLOADING FILES 1. Go to the Ramsey Electronics website at www.ramseyelectronics.com. Scroll to the bottom. Under Pro

AR2 • 6 3. When the “File Download menu appears click on “Save”. 4. The “Save As” screen will appear. In the “Save

AR2 • 7 7. Click “Save”. The file will now download from the website to your C: drive in the directory “UP24 Download”.

AR2 • 8 EXTRACTING FILES 1. Right Click your “Start” button and select “Explore” 2. Left click on UP24 Download. 3. Double click o

AR2 • 9 INSTALLING DRIVERS 1. Connect UP24B to your computer using a USB cable. Turn on UP24B 2. The above screen should appear on