Ramsey Electronics AR2 Bedienungsanleitung PDF herunterladen (Seite 22)

AR2 • 22

S RE Set reset elevation statistics

Explanation: Allows resetting of all elevation statistics to zero.

Example:

S RE<CR> sent

OK<CR><LF> returned

S RP Set reset pressure statistics

Explanation: Allows resetting of all pressure statistics to zero.

Example:

S RP<CR> sent

OK<CR><LF> returned

S SR # Set sample rate index

Explanation: Allows changing of the sample rate to an index of the table val-

ues below.

Example:

S SR 4<CR> sent

OK<CR><LF> returned

One of the following

0, 1/10s<CR><LF>

1, 1/5s<CR><LF>

2, 1/2s<CR><LF>

3, 1 sec<CR><LF>

4, 5 sec<CR><LF>

5, 10sec<CR><LF>

6, 15sec<CR><LF>

7, 30sec<CR><LF>

8, 1 min<CR><LF>

9, 5 min<CR><LF>

A, 10min<CR><LF>

B, 15min<CR><LF>

S RM # Set report mode.

Explanation: Allows turning on or off automatic data reporting at each sample

rate interval. 0 = off, 1 = on.

This mode is settable only by this command. If a fast sample rate is selected

and report mode is activated you may find it nearly impossible to deactivate.

A good solution is to enter the deactivate command sequence in a text file and

then transfer it into your terminal program.

Example:

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

Ramsey Electronics AR2 Bedienungsanleitung Seite 22